How to Grow Herb Gardens from Seed

Phát triển một khu vườn thảo mộc từ hạt giống là một nỗ lực rất bổ ích và một hoạt động thời gian mùa đông vui vẻ. Nói chung, các loại thảo mộc chịu đựng điều kiện phát triển kém và vẫn thưởng cho bạn với lá thơm và hoa.


1
Soak the seeds in water for a few hours, or even overnight, before planting them.
Ad

2
Assemble the soil and containers for growing the seeds in. Poke holes in the bottom of your containers for drainage. Fill containers full with a soil mixture. Pat down the soil to be sure there are no air pockets or your seeds might drop right to the bottom.

3
Sow the herb seeds 1-3 times deeper than the size of the seed. Very tiny seeds need only to be pressed into the soil. Water the seeds and cover the containers with plastic kitchen wrap. This will keep the soil warm and eliminate the need to water until the seedlings emerge. Place flats in a warm, sunny area. Until the seeds emerge, keep the soil damp.

4
Remove the plastic once the seedlings emerge. If you plan to transfer your seedlings to the garden, wait until at least two sets of leaves have emerged. Once it is warm enough, start leaving them outside a few hours a day. This will "harden them off" and get them ready for the harsher outdoor conditions. Water well.

5
Transplant the plants by pinching off the lower set of leaves. Dig a hole deep enough to hold the plant just over the point where you pinched the leaves. These leaf nodes will grow roots. Gently turn the pot upside down and allow the plant to fall out into your hand. Don't pull the plant by the stem or leaves. Place the plant in hole and pat soil around your plant. Water once daily for a week and twice weekly thereafter. When the plants begin to get bushy, add mulch around them to discourage weeds.

6
Finished.


How to Grow Sprouts

1
Start with organic seeds intended for edible sprouts. Many commercial seeds are pre-coated with fungicides, pesticides, and other things that you won't want to eat.

2
Experiment with a variety of seeds. Among those popular for edible sprouts are alfalfa, amaranth, barley, broccoli, lentils, mung beans, pea shoots, radish, sunflower, and red clover.

3
Soak the seeds in a jar or bowl for a period of time, usually overnight. Do a web search for "sprouting chart" for timing details.

4
Sprouting systems usually consist of trays for the sprouts to sprout and grow in. There are several needs of the sprouts, they need to be well drained, they need to be rinsed regularly, and they must not dry out. For best results, use a sprouting tray. You can fashion your own with a glass casserole pan; you'll need a screen cover for draining.

5
If your home is very cool, you might need a heater. An 8-watt heater for reptile tanks placed under a sprouter will help without cooking them.

6
In general you should rinse and drain the sprouts every morning and evening. Consult the sprouting chart for more specific advice for the type of sprouts you're growing. In a soil-based system plant the seeds in tray, and water several times per day. Soil and trays are often used for wheatgrass, buckwheat, and sunflower greens.

7
Some sprouts such as radish sprout better in darkness, but they will need to be in light after sprouting in order to turn green and grow larger.

8
Some sprouts will need to be dehulled after sprouting for several days. Swirl the sprouts in water to help separate the hulls, and be sure to drain afterwards.

9
Use fresh sprouts right away, or store them in the refrigerator for up to several days.


How to Design a Successful Indoor Garden

Duplicating Mother Nature indoors for our plant friends is more complicated than most people often realize. Here are some tips for increasing your chance of success at creating a delightful indoor garden.
1.
Be sure you have the following:
Light
Good ventilation (air flow.... good idea)
A little humidity (moisture)
A comfortable temperature.


2.
Pick good lighting and ventilation to aid their growth. The area you've chosen to place your indoor garden and the stage of growth your plants are at will determine your type of growing light.
A single fluorescent light with no fan is fine for clones (cuttings).
Every other stage of growth indoors will benefit from having an oscillating fan on the plant(s). Plants do not have lungs, so they need the oscillating fan to move the air for them.
For vegetative plants, you may need 6 or 8 fluorescent lights, or even a molten lava.
For producing fruits, vegetables, and flowers, though, you will most certainly want a high pressure sodium light.
You can also consider purchasing a LED-lamp. Their prices have gone down lately, and running a LED-lamp is much less costly than running High Pressure Sodium Lamps. This will make LED-lamps more environmentally friendly; also, in some studies LED-lamps, emitting the blue and red lights used by plants, have given larger yields than with other lamps.

3.
Keep a metal halide light around 40 watts/sq foot. For flowering, you want it to be more, at about 50 to 80 watts/sq foot. Get a good fan to control the heat if you get a good light. Your fan should be able to exhaust your garden area in 5 minutes or less. Make the exhaust run as short and direct as possible.

4.
Get a good thermometer and run it in the area for a few days to make sure everything is okay temperature-wise before beginning your garden. Too many fluctuations in temperature will probably mean the area you've chosen is not ideal.

How to Grow Tomatoes Indoors

  1. Learning how to grow tomatoes indoors has several advantages. Doing this will allow you to produce fresh, flavorful tomatoes throughout the winter months, when tomatoes from the grocery store are likely imported and tasteless. Growing indoors is also useful if you live in a multi-unit building and do not have access to an outdoor space for growing vegetables. In any case, growing tomatoes indoors is only a moderately challenging process requiring just a few pieces of equipment.
    1. 1
      Choose a location for your tomato plant. Adequate light is the crucial consideration when growing tomatoes indoors. The ideal spot in your home for positioning the plant is near a floor-to-ceiling window that faces south (or north if you are in the southern hemisphere). If you don't have a southern window, eastern windows are the next best option.
    2. 2
      Select a variety of tomato to grow. When growing indoors, you won't enjoy success with the full range of varieties that you can choose from when growing outdoors. There are several important considerations when choosing a variety.
      • For indoor tomato growth that produces fruits gradually and consistently throughout the winter, grow an indeterminate variety. Determine tomato varieties—those that reach a specific length and then stop growing - don't perform as well indoors.
      • It is also preferable to grow small cherry or pear tomatoes, rather than larger varieties grown for slicing. These produce fruits more consistently indoors.
    3. 3
      Place the tomato plant in an appropriate container. To grow the tomato plant large enough to produce fruit, you will need to grow it in a large container. A plastic 5-gallon bucket is ideal, but a larger container will also work. Avoid using anything smaller than about 5 gallons (19 L).
    4. 4
      Purchase grow lights for the tomatoes. Growing fruits and vegetables indoors requires the use of full spectrum fluorescent lamps, often labeled as grow lights, plant lights, or aquarium lights. Two tubes will generally be sufficient for growing 1 tomato plant. You can find several types of stands and mounts for these lamps at hardware stores and nurseries.
    5. 5
      Aid the tomato plant in pollination. When grown outdoors, tomatoes rely on the vibrations created by bees, birds, and the wind to distribute their pollen and develop fruit. To simulate this effect, gently shake the plant's flowers daily or place a fan nearby to create airflow.
    6. 6
      Grow the tomato plant as you would outdoors. Aside from the special considerations mentioned above, indoor tomato plants need little additional care that is not required by outdoor plants. Turn the grow lights on during each day and off during the night to simulate the rising and falling sun. Maturity times will vary based on the variety of tomato planted and the conditions in your home.
    follow Internet

How to Grow Tomatoes in a Green House

Learning how to grow tomatoes indoors can be very rewarding. Your own organically-grown produce always tastes better than the store-bought. For an indoor garden, you will want to choose a crack-resistant variety. Not only will these tomatoes do better indoors under lights, but these varieties also tend to be the better sauce/paste tomatoes.


  1. 1
    Prepare a good starting soil mix. Use a standard potting soil mix with about 10% worm castings added. Standard potting soil is usually equal parts perlite, vermiculite, and sphagnam peat and is adjusted to the right Ph by adding 1 teaspoon of hydrated lime for every gallon of soil mix. Ph adjusting your mix this way for tomatoes is good because the lime is a good source of calcium, which prevents blossom end rot in tomatoes later on. Moisten the initial mix little by little, using plain water and Thrive Alive B1. The mix is just right when you squeeze a handful and get a few drops out of it...but only a few. If you mix it a little too wet, just add a little dry vermiculite and remix.
  2. 2
    Start your seeds. Start with a regular nursery tray full of your soil mix. Tomato seeds should be planted 1/4 inch deep, and about 8 seeds/inch. You may want to cover them for the first few days to keep them from drying out. Tomato seeds germinate best at 80 degrees, and should be mostly up in 5 to 12 days. Remove any cover you may have on them as soon as they begin popping up. The fresh sprouts should be kept 4 to 6 inches under a fluorescent light. The light should be kept on 18 to 24 hours a day. When they are 1 1/2 inches tall, carefully transplant them into their own 6 inch containers.
  3. 3
    Keep the tomatoes under 2 or 3 fluorescent lights for 18-24 hours daily. Feed them Maxsea 16-16-16 at this point, although they could probably use even more nitrogen (the first number). The strength of the solution is about 600 ppm, which is 1 rounded teaspoon of Maxsea/gallon. Add 10 ml/gallon Thrive Alive B1. The ideal temperatures for growth are 70-75 degrees during the day and 65-67 degrees at night. When the plants reach 12 inches or more, they may need transplanting to one gallon containers. After 6 or 8 weeks, your plants should be just about ready to begin fruiting them.
  4. 4
    Be familiar with how to force flowering in plants. Some tomatoes flower in 60 days and others take up to 80 days, beginning from the time you force flowering. Just as you begin this process, you want to make your final transplant into 3 gallon containers. For the first two weeks, you want to feed them heavy with a 10-52-70 or similar fertilizer. Each time they need water, give them food also at 800 ppm, which would be a little over half of the recommended "full strength" on the directions. Keep in mind you are feeding them each time you water them. For the rest of the season, feed them 16-16-16 or similar at 800 ppm.
  5. 5
    Pollinate the flowers everyday while it is warm and humid. Ideally, the humidity will be 65 to 70 percent. Greenhouse growers usually do this between 11:30am and 12:30pm (basically noon) when these conditions occur naturally. For them, early and late day pollination often will not produce proper crops. The tomato flower consist of two parts. The male anthers will drop the pollen. The female carpels will catch the pollen. The resource link below includes pictures of both and of tomato flower pollination. Most male anthers produce their pollen on the outsides of the anthers, making it easy to release pollen into the wind for pollination. In the tomato plant, however, pollen is produced internally, as if trapped in a straw. This is the biggest problem for tomato pollination. The plant needs vibration at the right frequency, such as the buzzing of a bees wings, to dislodge and release the pollen. Take an electric toothbrush to each support truss and main branch. The more pollen to successfully fertilize the plant, the more seeds will be produced in the fruit (and therefore the meatier the tomato will be). Larger tomato growing operations should consider bees for pollination.
Follow Internet

The Greenhousexh Environment: Boilermaking Solutions

The greenhouse environment, including light and temperature, has a large impact on our ability to grow and schedule high-quality greenhouse crops. Additionally, energy costs are second only to labor for many in today’s greenhouse industry. As a result, growers want to make sure that heating and lighting are used efficiently and profitably. Whether identifying how to schedule and produce new flowering crops or reduce energy inputs for old standbys, research at Purdue aims to increase the effectiveness and efficiency of environmental inputs.
This article is the second in a series of articles highlighting the Floriculture team in the Department of Horticulture and Landscape Architecture (HLA) at Purdue University. The first article focused on floriculture and ornamental horticulture at Purdue and summarized our teaching and Extension outreach programs, while subsequent articles will focus on greenhouse cultural, sustainability and consumer preference, and ornamental pest and pathogen research, services provided by the Purdue Plant and Pest Diagnostic Lab, and the Horticulture Gardens, greenhouses and Master Gardener programs. This article will highlight some of the recent research conducted at Purdue that aims to improve energy use and cropping efficiency with the greenhouse environment.
Poinsettia Cold Finishing
While the holiday poinsettia recently took second fiddle to orchids on a per-pot-value, it is still the number one potted plant produced in the United States in terms of units sold. With increasing energy prices, poinsettia producers are looking for ways to increase profitability for a crop with razor-thin margins. One strategy to save money is to reduce the greenhouse air temperature. However, the impact of lower air temperatures starting in mid-October on poinsettia growth, development, and quality was not clear. As a result, researchers at Purdue teamed up with Dr. Brian Krug (University of New Hampshire) to assess cold-finishing poinsettias in northern locations using cultivars that are marketable early in the season (six- to eight-week response time), moderate- to high-vigor, and with naturally large bracts.
Eight cultivars were selected from each of the major breeders, including Dümmen, Selecta First Class, Syngenta Flowers, and the Ecke Ranch. Rooted cuttings of each cultivar were planted on weeks 31, 32 and 33 and plants of each cultivar from each planting date were transferred to greenhouses with day/night temperature (12 hour/12 hour) set points of 68/56° F, 70/62° F, and 75/67° F on Oct. 15 at Purdue and the University of New Hampshire.
For all the poinsettia cultivars tested, cold finishing did not adversely affect bract size, time to marketability, or plant height as it was within the commercially acceptable range (Figure 1). Growers utilizing cold finishing may be able to reduce heating costs by 20 to 55 percent, depending on their greenhouse location, structure, fuel source, etc.
Lighting During Propagation
Young plants, including plugs and liners, are produced in late winter and early spring. Propagation of young plants occurs when outdoor light is at seasonally low levels, while further reductions of up to 50 percent can occur due to greenhouse glazing material, superstructure, and hanging baskets. Research at Purdue is shedding some light on the benefits of providing supplemental light during propagation and exploring new alternatives for providing supplemental light.
We have propagated a number of species of specialty annuals, from argyranthemum to verbena, under a range of daily light integrals (DLIs) during rooting. As DLI during propagation increased, root growth increased for all species (Figure 2). In addition to increasing root growth and rooted liner quality, the DLI during propagation can also influence growth and flowering after transplant. For example, flowering can be hastened by several days to weeks by increasing DLI during propagation. Our research indicates that by increasing the DLI during propagation growers may be able to reduce time until rooted cuttings are considered salable or transplantable, as well as finishing time after transplant.
How can we increase the DLI during propagation? Although supplemental light is traditionally provided by high-pressure sodium (HPS) lamps, light-emitting diodes (LEDs) are a technology with potential as a supplemental light source. However, there is little known about how effective LEDs are when used in a greenhouse during the production of plugs and liners. We are currently evaluating how effective and efficient LED light, composed of varying amounts of red and blue light, performs as a supplemental light source compared to HPS lamps during seed and cutting propagation. Additionally, we are evaluating the use of end of day red- and far-red light to suppress stem elongation to produce compact plugs.
High Tunnel Bedding Plants — No Heat, No Problem
While bedding plant production is the most valuable sector of the U.S. floriculture crop market, it is also a highly seasonal business. Therefore, many growers are looking to expand production without investing in infrastructure that may not be supported with year-round demand for production. The recent interest and subsequent expansion in local and sustainable agriculture has seen an increase in the construction and use of high tunnels. While high tunnels are commonly used for season extension for field-grown crops in the spring, high tunnels are not designed to replace greenhouses for year-round production. However, we thought the seasonal nature of high tunnels may be used to produce bedding plants finished for the spring without using any heat.
We teamed up with Dr. Neil Mattson (Cornell University) to grow common bedding plants such as pansy, petunia, osteospermum and snapdragons in an unheated high tunnel and a traditional greenhouse starting at the beginning of April. While cold-sensitive species such as vinca didn’t finish so well in the high tunnel, cold-tolerant crops grown in the high tunnel were more compact with larger and more numerous flowers compared to plants grown in the greenhouse, with minimal delay in time to flower (Figure 3). This year we will be looking at ways to reduce the risks associated with no heat tunnel production.
Hot New Crops for Cool Climates
New floriculture crops are introduced by breeding companies every year. While the availability of new and novel plant material is attractive to growers, it can be difficult to identify successful strategies to produce a high-quality crop on-time and efficiently. Purdue has teamed up with suppliers of new genetics to generate greenhouse lighting and heating strategies to provide growers with the resources to successfully propagate and finish new floriculture crops.
Tecoma (Tecoma stans) is a flowering tropical woody plant from Central and South America and Ball has recently developed a seed-propagated variety called ‘Mayan Gold’. Our research indicates that increasing the DLI during propagation increases seedling root and shoot growth and quality. Many tropical plants are photoperiodic and flower in response to a certain day length and ‘Mayan Gold’ tecoma is no exception. After growing ‘Mayan Gold’ tecoma under day lengths ranging 9 to 16 hours long, it appears to be a facultative long day plant and days 14 hours or longer induces a strong flowering response. To produce high-quality plants, warm temperatures above 68° F and high DLI are required during finishing (Figure 4).
The Future
With energy prices on the rise, growers want to ensure every penny spent makes cents (pun intended!). Our goal is to increase the efficiency and profitability of greenhouse producers, and the Floriculture and Ornamentals group at Purdue University is committed to conducting research that provide growers with research-based solutions that address today’s challenges within the greenhouse environment. Whether at Purdue or another land grant university, the importance of industry, association and grower support of floriculture research programs is more important than ever and no donation is too small.


About The Author

Christopher J. Currey is a graduate research assistant and Roberto G. Lopez is an assistant professor and floriculture extension specialist at Purdue University. They can be reached at ccurrey@purdue.edu and rglopez@purdue.edu, respectively.

The Department of Horticulture and Landscape Architecture


A prominent Leamington businessman has died  after he was shot during an attempted robbery in Brazil on Saturday. According to the news website Veja Sao Paulo, New Energy Farms president Dean Tiessen was in Brazil for 10 days to attend meetings about agro-business. The website www.expat-blog.com reports that he was returning with friend and New Energy Farms CEO Paul Carver from Guaruja along the Anchieta Highway when they came across an attempted cargo robbery. The robbery suspects ordered the two to exit their rental car, the website reports.

It is unclear why Tiessen was shot but one source cited by the website said he was shot twice after moving to remove his seatbelt.

Tiessen was the president and owner of New Energy Farms, which supplies crops like the Miscanthus plant that could be used for biomass projects related to agriculture.

"Dean Tiessen, was an ambassador, a persons who was known, without national appointment, to represent the Ontario Greenhouse Vegetable Growers profession and it’s activities and fields of endeavor", said Antonio Gomez of the Leamington Grower. "On Dec.07.2013, we lost one of our industries best. He will be missed, with a heavy heart."



Floriculture and Ornamentals Education and Extension at Purdue University

The Department of Horticulture and Landscape Architecture (HLA) at Purdue University can trace its roots back to 1884, when Professor James Troop founded the Department of Horticulture and Entomology. Since then, the departments have separated, but have had a long history of floriculture and ornamental horticulture Extension and education.
Numerous individuals that have impacted our industry graduated from both departments, including: Dr. Marvin Miller (Ball Horticulture Co.); Mike McCabe (current OFA President); Paul Hammer (Dümmen USA); John Swarens (Ball); Claire Sawyers (Director of Scott Arboretum); Anthony Aiello (Director of Horticulture and Morris Arboretum Curator); Dr. Doug Needham (Longwood Gardens); Ricky Kemery (Purdue Cooperative Extension service); Dr. Mary Welch-Keesey (Purdue University); Dr. Joyce Latimer (Virginia Tech University); Dr. Brian Whipker (North Carolina State University); Dr. Jonathan Franz (USDA-ARS); Dr. Tracy Dougher (Montana State University); Dr. Doug Bailey (University of Georgia); Dr. William Graves (Iowa State University), Dr. Michelle Jones (The Ohio State University); Dr. Raymond Cloyd (Kansas State University); Dr. Gary Knox (University of Florida), Dr. Bob Tripepi (University of Idaho), and Dr. Luis Cañas (The Ohio State University).     
This article, the first of a seven-part series focusing on floriculture and ornamental horticulture at Purdue, summarizes our teaching and Extension outreach programs. Subsequent articles will focus on environmental, cultural, sustainability, consumer preference, ornamental pest and pathogen research; services provided by the Purdue Plant and Pest Diagnostic Lab; and the Horticulture Gardens, Greenhouses, and Master Gardener programs.
The floriculture and ornamentals Extension, research, teaching faculty and professional staff at Purdue University include individuals from agricultural and biological engineering, botany and plant pathology, entomology and HLA. Current faculty, specialists, and professionals with floriculture and ornamentals responsibilities and interests in HLA include Roberto Lopez (Commercial Floriculture Extension Specialist), Tyler Mason (Floriculture Technician), Natalia Dudareva (Molecular Biology of Floral Scent), Jennifer Dennis (Specialty Crop Marketing Specialist), Michael Mickelbart (Plant Physiology), Michael Dana (Landscape Horticulture), Elizabeth Maynard (Commercial Floral and Vegetable Crops), Mary Lou Hayden (Garden Coordinator and Floral Design), Rosie Lerner (Consumer Horticulture Extension and Indiana State Master Gardener Coordinator), and Rob Eddy (Plant Growth Facilities Manager).  In addition, extensive support is provided by the Purdue Plant and Pest Diagnostic Lab (P&PDL) members Tom Creswell and Gail Ruhl, Janna Beckerman (Ornamental and Fruit Disease Extension Specialist), Cliff Sadof (Landscape Entomology Extension Specialist), and Chad Martin (Renewable Energy Extension Specialist).
Coursework and Educational Opportunities
Enrollment in the floral design, ornamentals, and landscape horticulture area continues to be strong at Purdue University. There are currently over 200 HLA undergraduate students enrolled in the following concentrations: landscape horticulture and design, horticultural production and marketing, public horticulture and horticultural science. Students interested in ornamental plant production and marketing have a wide array of courses available to them at Purdue. In HLA students can take courses in plant propagation, bedding plant, poinsettia (total crop management), and ornamental plant production, herbaceous and woody landscape plant identification, flower arrangement and indoor plant management, professional floral design, landscape design and construction, and principles of marketing and management of horticulture businesses.  
Students often learn the principles of greenhouse crop production by attending lectures, completing homework assignments and projects, and going on field trips. However, an exciting new course teaches students specific skills many horticultural employers want: how to put principles into practice to produce a greenhouse crop that meets strict quality specifications, while working effectively as a member of a production team. Christopher Currey (Ph.D. student) developed the Total Crop Management (TCM) course in collaboration with Roberto Lopez and Michael Mickelbart. TCM leads students through hands-on growing and decision-making based on the integration of information about the greenhouse environment (light and temperature), plant growth (height and growth regulator applications), media and irrigation water quality (pH and EC), and pest populations (Figure 1). The end result is students who understand how to collect and interpret data and use the information to produce a uniform, high-quality, finished crop of poinsettias. In order to provide students with a basis for recognizing, diagnosing, and managing insect and disease problems of the greenhouse, nursery, and urban forest landscapes, Janna Beckerman and Cliff Sadof have recently developed a new course that integrates the general principles of botany, horticulture, plant pathology and entomology. Students in Plant Health Management for Ornamental Plants develop the problem-solving skills used by plant health practitioners to diagnose and manage plant diseases and disorders.
The HLA program is unique in that it has courses in Floral Design and Interior Plant Management and Professional Floral Design, both taught by Mary Lou Hayden. These courses are extremely popular with a current enrollment of more than 90 and 20 students, respectively. Topics covered in the classes include: principles and elements of floral design, color, cut flower care, house plant care, plant propagation, body flowers and wedding design, and many others. Over the course of the semester students get hands-on practice with 14 different floral design forms.
Major Floriculture Extension Programs
Roberto Lopez, Jennifer Dennis, Liz Maynard, Janna Beckerman and Cliff Sadof all have primary Extension responsibilities within the area of ornamental plants. As the floriculture Extension Specialist, Roberto has developed a floriculture website (http://flowers.hort.purdue.edu) and Janna has developed a green industry resources website (http://www.btny.purdue.edu/Extension/GIWG/) to provide commercial growers with Purdue-generated trade and scientific articles, bilingual floriculture bulletins, production guides, podcasts and links. Liz works with the Northwest Indiana Floriculture Association (NWIFA) to deliver regular educational programs, usually hosted by NWIFA members in northwest Indiana and nearby Illinois. In addition, Roberto publishes a quarterly e-bulletin, “The Indiana Flower Grower,” that is distributed to greenhouse growers, distributors, businesses, and academics across the United States, Canada and Central America.
Floriculture Extension Specialists from New York (Dr. Nora Catlin, Cornell), North Carolina (Dr. Brian Whipker, NC State), New Hampshire (Dr. Brian Krug, University of New Hampshire), and Indiana (Roberto Lopez) have created the new e-Gro Alert for greenhouse growers. e-Gro Alert will notify growers of insect, disease, nutritional, environmental and physiological problems as they develop during the bedding plant production season. It will help growers know what to be on the lookout for in their own crops. e-Gro Alerts will be emailed as needed during the season, probably about four per month. To view e-Gro Alert, visit www.e-gro.com.
In 2010 Roberto Lopez, along with Dr. Mark Bridgen, and Dr. Neil Mattson (Cornell), began offering an educational tour for small- and medium-sized greenhouse operations and other horticultural professionals who would not otherwise attend the California Spring Trials (Figure 2). Attendees get a first-hand look at new floriculture plant releases and interact with breeders and producers to learn how to use the material in containers and in the landscape. Response was so positive that the tour was offered again in 2011 and sold out within one week. In 2010 and 2011 attendees were from Canada, New Zealand, Taiwan and the United States. We are not able to offer the tour in 2012, but watch for it to return in 2013.
In an effort to bring industry experts and hands-on training on basic growing techniques and concepts, Roberto Lopez and Brian Krug have created an educational module series in Indiana and New Hampshire, respectively. This series is specifically aimed at the most critical employees that are often under educated. The programs are funded by the individual state department of agriculture specialty crop block grants (SCBG), Fafard and Everris. The goal of the educational series is to confront current industry issues and offer a series of two-hour sessions over the course of the bedding plant production and marketing season. Each session is focused on one topic (e.g., fertility, properties of growing substrate and substrate selection, temperature and light management, water quality, pH and alkalinity management, height control, disease and insect management, and marketing strategies).
In addition, the SCBG provides funds for Chad Martin and Roberto Lopez to visit growers individually to evaluate the efficiency of their greenhouse structures and conduct an energy audit. Each grower will be given a customized report that will identify actions to increase the energy efficiency of each greenhouse structure and information on USDA Rural Energy for American Program (REAP) grants, loans, and loan guarantees for renewable energy sources such as wind, solar, geothermal, or biomass or energy efficiency improvements.
To help growers make informed decisions and tackle the issue of sustainable greenhouse production and certification, Roberto Lopez and Brian Krug formed a collaborative research and Extension effort with Stephanie Burnett (University of Maine) and Neil Mattson called the Floriculture Sustainability Research Coalition (FSRC). The group is currently conducting research on energy efficient crop production, plant nutrition, and efficient irrigation methods. As research is generated, articles are published in scientific and trade journals and talks are given around the country.  In collaboration with OFA, the group is developing a website that will be a central location for articles and information related to sustainable greenhouse production. The goal is to educate greenhouse growers on how to successfully implement sustainable production practices and to identify consumer segments that are willing to pay premium prices for sustainable floriculture crops.   
Future
Whether at Purdue or another land grant university, the importance of industry, association and grower support is more important than ever and no donation is too small. The Purdue floriculture and ornamental horticulture group appreciates the excellent industry, grower, association, allied trade company, university, state and national competitive granting agencies and endowments support of our research, Extension and teaching programs. Without your invaluable input, leadership, cost-sharing and donations we would not be successful in obtaining external competitive funds such as the USDA Specialty Crop Research Initiative necessary to fund the collaborative LED greenhouse lighting research at Purdue, Michigan State, University of Arizona and Rutgers.

National Floriculture Forum 2014 Planned For May 13-14, 2014, In Winnipeg, Manitoba

Be sure to pack plenty of layers if you plan to attend the 2014 National Floriculture Forum (NFF). The meeting will be held May 13-14, 2014, in Winnipeg, Manitoba.
NFF is an educational meeting of university professors, Extension specialists and educators, graduate students, government scientists and industry leaders in floriculture that has been held annually for more than a decade. This meeting brings together the floriculture community to address issues of importance to the industry, form collaborative relationships and learn through tours and connecting with each other.
The first day of this year’s forum will consist of update presentations by participants. Each organization, school or company attending will be provided with the opportunity to deliver a 15-minute presentation. Additionally, the forum will host a graduate student poster competition.
The second day will feature a tour to a commercial peat bog and processing facility, as well as a restored bog. Attendees will also visit an indoor mushroom production facility and a greenhouse vegetable grower.
As in years past, sponsorship is needed for this year’s event. Suggested sponsorship levels are:
  • $ 250 Silver
  • $ 500 Gold
  • $ 1,000 Platinum
  • $ 500 Graduate Student Travel Grant
Additional sponsorship opportunities exist in supporting the tour bus, lunches and snacks, as well as coffee breaks and social events at the conference. Sponsor names and logos will be featured on the NFF website, printed on conference literature and recognized throughout the conference. Please consider contributing to this unique and important event.
For information on how to sponsor NFF, contact Chris Currey at ccurrey@iastate.edu.

New App Helps Deliver Crucial Information at All Times

Your customers demand a consistent, high quality finished product grown from Proven Winners and Proven Selections liners. Having access to crop culture information developed by Pleasant View Gardens’ expert growing staff is a key to your success and bottom line.
The Grower’s Challenge
Inputs to greenhouse production vary between varieties, liner types and finished container sizes. While in the field or greenhouse, growers often need to make critical production decisions related to temperature, moisture, pH, lighting, pinching, PGRs and more.
Getting help on your growing decisions from experts is not always as easy as picking up the phone or reaching out by email. The person you need may be away from their desk or in another time zone or tied up in a meeting. Growing issues wait for no one.
Technical advice or assistance might be abundant online but growers don’t have the luxury of being at their desktop computer station for support at the drop of a hat. The rubber meets the road in the greenhouse – that’s where the problems generate. On-site solutions could make the difference between crop success and failure.
The Smart Solution
Pleasant View Gardens is helping to remove the barriers of access to information when and where the grower needs it. They’ve always provided their greenhouse growers with product information, tools and tips for better growing and training and support to maximize production. Now, by contributing to the development of a unique mobile technology, they’re making training and crop management tools available for nursery and greenhouse growers on the go.
Pleasant View Gardens is providing customers with a new smart phone and tablet application called Smart-Grower that turns roadblocks into super highways for the flow of relevant, on-demand and convenient information that educates and solves problems, 24-7. With Smart-Grower, greenhouse growers will have a cloud database of plant product information, tools for growing and employee training at their fingertips around the clock. This database can be accessed via smart devices from wherever the user might be – in the field, the greenhouse, their vehicle or with their customer, day or night.
The underlying Back Pocket Grower software powering PVG Smart-Grower is being developed by e-learning expert Dr. Bruce MacKay at ThomasBaine Ltd. of New Zealand.  Back Pocket Grower is a collaboration with Dr. Paul Fisher at the University of Florida and companies including Pleasant View Gardens in the Floriculture Research Alliance (floriculturealliance.org).  The software is being developed to provide both university extension information as well as customized product guides to mobile devices.

Smart-Grower will have complete product information on Pleasant View’s plant list, liner solutions, optimal container options and growing procedures and instruction. Content will be variety and crop specific, including all Proven Winners, Proven Selections, and Edible Collection plant material. The software will have cross-referencing capability, whereby a grower can search a specific variety and pair it with the best liner option, or connect with tools and tips for improving production, or develop growing processes/schedules that custom fit the grower’s operation and time-table. Customers can also email or phone our expert Veronica Lende directly from the application.

The High-Tech Future Of The Greenhouse Grower

The success of your greenhouse business over the next 30 years will require developments in multiple segments of the operation. For Greenhouse Grower’s 30th anniversary look at the future, we spoke to experts in a number of different areas, including Charles Grinnell, Harvest Automation (robotics); Gary Falkenstein, ePlantSource (web technology) and Paul Pilon, Perennial Solutions Consulting (production technology) to get their opinions on what new opportunities may be in the pipeline for greenhouse growers, as well as some that may already be available.
 Greenhouse Robotics Will Lead To Plant Quality And Yield Improvements
Tools from other industries — processors, cameras and batteries — are driving robotics for moving plants in the greenhouse. But as the technology develops, more complex tasks like trimming or applying chemicals to individual plants as needed could be a reality, says Harvest Automation’s Charles Grinnell.
Cloud Computing Is The Next Step For Greenhouse Hardware And Software Systems
Developments in production technology have had an obvious impact in the greenhouse, but according to Gary Falkenstein of ePlantSource, advances in software tools will be the next big leap for growers and their businesses.

Purdue LED Open House Slated for January


Purdue University will host an open house to showcase its latest research on light emitting diode (LED) technology being conducted in the Department of Horticulture and Landscape Architecture.
The open house will take place from 1 until 5 p.m. in the university's horticulture greenhouse located at the corner of Marsteller and Harrison streets on Purdue's West Lafayette, Ind. campus.
To register for the event, please go to http://content.amp.vg/web/dpjycki44fzvx?rand=1
The open house is sponsored by Purdue Extension, the Purdue Department of Horticulture and Landscape Architecture, USDA Specialty Crop Research Initiative, HortAmericas and Philips Lighting.
For additional information, contact Dr. Roberto Lopez at rglopez@purdue.edu.